Mast for Windsurf Sail 2022 NP SPX 70 SDM Mast - 490
  • Mast for Windsurf Sail 2022 NP SPX 70 SDM Mast - 490

Mast for Windsurf Sail 2022 NP SPX 70 SDM Mast - 490

Reference: 120114-000_0999-490 | Manufacturer: Neilpryde
593.13 USD
Dostępność: średnio

Super high quality

70% carbon

Progressive Flex depends on the length: CC-FT

Sizes 430, 460, 490


Colour: div.

Size: 490

Shipping date: Up to 5 days

Description

Mast for Windsurf Sail 2022 NP SPX 95 SDM Mast - 490

Sizes: 430 / 460 / 490 / 520

Diameter: SDM

More is less. Being a tiny bit heavier than 100% carbon masts due to a lower carbon percentage, the RDM and SDM fully convince with their durability, giving you extra safety and strength.

The NeilPryde mast range is designed following the Progressive Flex concept and so when used with a NeilPryde sail they have the correct shaping, twist and ability to remain stable in variable conditions.

All NeilPryde mast models of the same length will have the same bend curve. This means you are not limited to a particular mast model to match your sail. The curve will only differ across different mast lengths, regardless of the model (TPX100, SPX90-95, SPX65). Our shorter masts are close to ‘flex-top curve’ while longer masts are closer to ‘constant curve’ - this is why we call it the Progressive Flex.

The distance from the bottom of the mast to the boom is relatively constant between all mast lengths. On short masts the boom head is connected at a higher point than on longer masts. To compensate for much less ‘flexing length’ above the boom, short masts will have a softer top section compared to long ones as there is much more sail area above the boom that needs to be supported by the mast.

Since sails are designed around specific mast bend curves, we recommend using a NeilPryde mast with a NeilPryde sail as you will get the maximum performance out of your rig.

Characteristics

SHARK SKIN

SHARK SKIN

TPX and SPX masts are finished using our unique, “Shark skin” surface texture layer. This low friction surface finish prevents wet materials from sticking to the mast surface and reduces friction.

Specification

Length (cm)
Diameter
Carbon content (%)
Bend curve
IMCS
Weight (kg)
Length (cm)
340
Diameter
RDM
Carbon content (%)
90
Bend curve
Progressive FT
IMCS
15
Weight (kg)
1.3
Length (cm)
370
Diameter
RDM
Carbon content (%)
90
Bend curve
Progressive FT
IMCS
17
Weight (kg)
1.4
Length (cm)
400
Diameter
RDM
Carbon content (%)
90
Bend curve
Progressive FT
IMCS
19
Weight (kg)
1.5
Length (cm)
430
Diameter
RDM
Carbon content (%)
90
Bend curve
Progressive FT
IMCS
21
Weight (kg)
1.7
Length (cm)
460
Diameter
RDM
Carbon content (%)
90
Bend curve
Progressive FT
IMCS
23
Weight (kg)
1.85