Mast for Windsurf Sail 2022 NP SPX 50 RDM Mast - 370
  • Mast for Windsurf Sail 2022 NP SPX 50 RDM Mast - 370

Mast for Windsurf Sail 2022 NP SPX 50 RDM Mast - 370

Reference: 120117-000_0999-370 | Manufacturer: Neilpryde
338.07 USD
Dostępność: średnio

Lower carbon content, lower price - great performance

50% carbon

Progressive Flex depends on the length: CC-FT

Sizes 370, 400, 430


Colour: div.

Size: 370

Description

Mast for Windsurf Sail 2022 NP SPX 50 RDM Mast - 370

Sizes: 370 / 400 / 430

Diameter: RDM

More is less. Being a tiny bit heavier than 70% carbon masts due to a lower carbon percentage , the RDM and SDM fully convince with their durability, giving you extra safety and strength.

The NeilPryde mast range is designed following the Progressive Flex concept and so when used with a NeilPryde sail they have the correct shaping, twist and ability to remain stable in variable conditions.

All NeilPryde mast models of the same length will have the same bend curve. This means you are not limited to a particular mast model to match your sail. The curve will only differ across different mast lengths, regardless of the model (TPX100, SPX90-95, SPX65). Our shorter masts are close to ‘flex-top curve’ while longer masts are closer to ‘constant curve’ - this is why we call it the Progressive Flex.

The distance from the bottom of the mast to the boom is relatively constant between all mast lengths. On short masts the boom head is connected at a higher point than on longer masts. To compensate for much less ‘flexing length’ above the boom, short masts will have a softer top section compared to long ones as there is much more sail area above the boom that needs to be supported by the mast.

Since sails are designed around specific mast bend curves, we recommend using a NeilPryde mast with a NeilPryde sail as you will get the maximum performance out of your rig.

Characteristics

SHARK SKIN

SHARK SKIN

TPX and SPX masts are finished using our unique, “Shark skin” surface texture layer. This low friction surface finish prevents wet materials from sticking to the mast surface and reduces friction.

Specification

Length (cm)
Diameter
Carbon content (%)
Bend curve
IMCS
Weight (kg)
Length (cm)
370
Diameter
RDM
Carbon content (%)
50
Bend curve
Progressive FT
IMCS
17
Weight (kg)
-
Length (cm)
400
Diameter
RDM
Carbon content (%)
50
Bend curve
Progressive FT
IMCS
19
Weight (kg)
-
Length (cm)
430
Diameter
RDM
Carbon content (%)
50
Bend curve
Progressive FT
IMCS
21
Weight (kg)
-